Product Details and Features:
1. Support single phase/three phase 220V, and three phase 380V
solar water pump inverter, power from 0.75KW to 160KW.
2. Simply connect the photovoltaic panel to the solar water pump
inverter, and the PV pump c be automatically started after
power-on.
3. It has protection functions such as PV over-voltage protection,
over-temperature automatic protect, etc., which can effectively
extend the life of the product.
4. Ensure solar power tracking efficiency can reach 99%.
5. All series of products can realize automatic switching of PV DC
input and grid AC input, which can meet 24 hours of no care work.
6. Supports IP20 and IP65 grade cabinet solutions.
7. LCD display, GPRS module, Output reactor Accessories.
Electrical Specifications
| PV input |
| Maxiumum input DC voltage | 400V DC |
| Recommended MPPT voltage range | 250~350V DC |
| Recommended input Operation Voltage | 310V DC |
| Grid or backup generator input |
| Input voltage | Single phase 220V(-15%~30%) |
| Output Specification |
| Rated output voltage | 3PH 220V |
| Output frequency | 0~500.00Hz (default: 0~50.00Hz) |
| 380V Solar Pumping Inverter |
| Input Specification |
| PV input |
| Maxiumum input DC voltage | 800V DC |
| Recommended MPPT voltage range | 450~650V DC |
| Recommended input Operation voltage | 540V DC |
| Grid or backup generator input |
| Input voltage | Three phase 380V(-15%~30%) |
| Output specification |
| Rated ouput voltage | 3PH 380V |
| Output frequency | 0~500.00Hz (default: 0~50.00Hz) |
| Protection |
| Built-in Protection | Lighting Protection ,over-current, overvoltage, ouput phase lose,
under-load, under-voltage, short circuit , overheating, water pump
run dry etc. |
| General Parameters |
| Application site | No direct sunshine, no dust,corrosive gas,combustible gas, oil
mist, steam,dripping or salinity etc. |
| Altitude | 0~2000m |
| Derated use above 1000m, per 100m, the rated output current
decrease 1% |
| Environment Temperature | -10°C~40°C (Environment Temperature be 40°C~50°C, please keep derated
use) |
| Humidity | 5~95%, non-condensation |
| Vibration | less than 5.9 m/s²(0.6G) |
| Storage Temperature | -20°C~+70°C |
| Efficiency | Rated Power Run≥93% |
| Installation | Wall or rail mounting |
| Protectiion Grade | IP20 |
| Cooling | Forced Air Cooling |
Accessories:
1. GPRS (support 2g/3g/4g internet)
2. Output reactor
3. LCD keypad
Model Range
| Drive Model | Related Voltage | Max DC input voltage (V) | Rated output current (A) | Applicable water pump (KW) | SIZE |
| VFD500M-20T00150-PV | 220V | 800 | 7 | 1.5 | SIZE A |
| VFD500M-20T00220-PV | 220V | 800 | 10.6 | 2.2 | SIZE A |
| VFD500M-40T00150-PV | 380V | 800 | 4.2 | 1.5 | SIZE A |
| VFD500M-40T00220-PV | 380V | 800 | 6 | 2.2 | SIZE A |
| VFD500-20T00150-PV | 220V | 800 | 7 | 1.5 | SIZE A |
| VFD500-20T00220-PV | 220V | 800 | 10.6 | 2.2 | SIZE A |
| VFD500-20T00400-PV | 220V | 800 | 17 | 4 | SIZE A |
| VFD500-40T00150-PV | 380V | 800 | 4.2 | 1.5 | SIZE A |
| VFD500-40T00220-PV | 380V | 800 | 6 | 2.2 | SIZE A |
| VFD500-40T00400-PV | 380V | 800 | 9.4 | 4 | SIZE A |
| VFD500-40T00550-PV | 380V | 800 | 13 | 5.5 | SIZE B |
| VFD500-40T00750-PV | 380V | 800 | 17 | 7.5 | SIZE B |
| VFD500-40T01100-PV | 380V | 800 | 25 | 11 | SIZE C |
| VFD500-40T01500-PV | 380V | 800 | 32 | 15 | SIZE C |
| VFD500-40T01850-PV | 380V | 800 | 38 | 18.5 | SIZE D |
| VFD500-40T02200-PV | 380V | 800 | 46 | 22 | SIZE D |
| VFD500-40T03000-PV | 380V | 800 | 60 | 30 | SIZE E |
| VFD500-40T03700-PV | 380V | 800 | 75 | 37 | SIZE E |
| VFD500-40T04500-PV | 380V | 800 | 96 | 45 | SIZE F |
| VFD500-40T05500-PV | 380V | 800 | 112 | 55 | SIZE F |
| VFD500-40T07500-PV | 380V | 800 | 150 | 75 | SIZE G |
| VFD500-40T09000-PV | 380V | 800 | 176 | 90 | SIZE G |
| VFD500-40T11000-PV | 380V | 800 | 210 | 110 | SIZE H |
| VFD500-40T13200-PV | 380V | 800 | 253 | 132 | SIZE I |
| VFD500-40T16000-PV | 380V | 800 | 304 | 160 | SIZE I |
| VFD500-40T18500-PV | 380V | 800 | 340 | 185 | SIZE J |
| VFD500-40T20000-PV | 380V | 800 | 377 | 200 | SIZE J
|
MPPT introduction
MPPT means Maximum Power Point Tracking; it’s a special function
for solar system, which is used to get the
maximum possible power from one or more photovoltaic devices,
typically solar panels. Solar panels have a
complex relationship between solar irradiation, temperature and
total resistance that produces a nonlinear output
efficiency which can be analyzed based on the I-V curve. It is the
purpose of the MPPT system to sample the output
of the cells and apply the proper resistance (load) to obtain
maximum power for any given environmental conditions.
By adopting this technology in the solar pump inverter, it
increases the working efficiency of solar panels,
and also adjusts the output frequency of solar pump VFD based on
the sunshine strength; make sure the system
always works at an optimum condition.
Quality Control
VEIKONG solar pump VFDs have passed comprehensive test process
during manufacturing.
R&D test: test the hardware and software performance, to make
the design more optimization, makes sure the products have
excellent
performance before production;
Board test: test the performance of every board in our products, to
reduce product defective rate;
IQC: take strict quality inspection for every income components, to
ensure every income components are qualified.
Aging test: make the solar pump VFDs at run status, put them in the
aging test house at 50°C for 48 hours, to remove every unqualified
products.
Load test: the last and the most important test, add different load
to the solar pump VFDs, test their input and output value, to check
their
working performance. unqualified products will be removed from the
team.
By applying such strict testing process, VEIKONG ensures every
outgoing solar pump VFD has excellent quality.
