Smart:
Full automatic operation, no need programming, user-friendly
Modular design, easy install , operate & maintain
GPRS Moudle Support remote monitoring & control (2G/4G/WIFI for
option)
Support LogEfficieo/Lable/Color/Function OEM Serive
Efficient:
1:1 match to AC pumps with strong overload capacity
30% more water output with advanced inverter control algorithm
Maximum power point tracking (MPPT) efficiency reach 99% with
advanced MPPT algorithm
Built-in booster with lower solar operating voltage to reduce solar
panels costs
Good ROI (Return on Investment) against diesel powered pumping
Reliable:
Hybrid function –Solar power priority, grid power/generator dual
input as compensation
Key parts use famous brand components, longer service life
Wide range of input voltage
IP65 design, continuous full-load operation between -10℃ to +60℃
Compatible with all AC pumps (0.37kw-150kw)
Certification qualified from authoritative third party, inverters
can be exported to all countries
Professional & Independent R&D team, good service for pre-sales
and after-sales
Fast delivery and quick response
Comprehensive Protections:
Soft start
DC Input Anti-reverse
AC Input/Output Phase lost(3Phase)
AC Output Short Circuit
AC Output Unbalance (3Phase)
Pump Dry run protection By sensor/ software
Water Over Flow of Tank
Solar Low power
Over Load
AC Output Over Current
Electrical Specifications
| PV input |
| Maxiumum input DC voltage | 400V DC |
| Recommended MPPT voltage range | 250~350V DC |
| Recommended input Operation Voltage | 310V DC |
| Grid or backup generator input |
| Input voltage | Single phase 220V(-15%~30%) |
| Output Specification |
| Rated output voltage | 3PH 220V |
| Output frequency | 0~500.00Hz (default: 0~50.00Hz) |
| 380V Solar Pumping Inverter |
| Input Specification |
| PV input |
| Maxiumum input DC voltage | 800V DC |
| Recommended MPPT voltage range | 450~650V DC |
| Recommended input Operation voltage | 540V DC |
| Grid or backup generator input |
| Input voltage | Three phase 380V(-15%~30%) |
| Output specification |
| Rated ouput voltage | 3PH 380V |
| Output frequency | 0~500.00Hz (default: 0~50.00Hz) |
| Protection |
| Built-in Protection | Lighting Protection ,over-current, overvoltage, ouput phase lose,
under-load, under-voltage, short circuit , overheating, water pump
run dry etc. |
| General Parameters |
| Application site | No direct sunshine, no dust,corrosive gas,combustible gas, oil
mist, steam,dripping or salinity etc. |
| Altitude | 0~2000m |
| Derated use above 1000m, per 100m, the rated output current
decrease 1% |
| Environment Temperature | -10°C~40°C (Environment Temperature be 40°C~50°C, please keep derated
use) |
| Humidity | 5~95%, non-condensation |
| Vibration | less than 5.9 m/s²(0.6G) |
| Storage Temperature | -20°C~+70°C |
| Efficiency | Rated Power Run≥93% |
| Installation | Wall or rail mounting |
| Protectiion Grade | IP20 |
| Cooling | Forced Air Cooling |
Accessories:
1. GPRS (support 2g/3g/4g internet)
2. Output reactor
3. LCD keypad
For 220V single phase motor connection
1: Single phase asynchronous motor wiring method (without starting
capacitor):
Notice: U is connected to the common end of the starting winding
and the working winding, V is connected to the starting winding,
and W is connected to the working winding;
Single-phase asynchronous motor if the rotary steering is not
correct, you can change the V and W wiring or set P22.13=1.
First solution: Set parameter P11.01=1 (Single phase motor type
without capacitor) or second solution: set P00.11=31 if your motor
frequency is 50 hz or set P00.11=32 if your motor frequency is 60HZ
For 220V single phase motor connection
2: Single-phase asynchronous motor wiring method (with capacitor)
Notice1: First solution: Connect motor cable to power terminal U
and V and enter BSC mode to Set parameter P23.15=0(output phase
loss shielding protection) or second solution: set macro P00.11=21
if your motor frequency is 50HZ or set P00.11=22 if your motor
frequency is 60HZ
