45kw 55kw VFD Frequency Inverter With Tension Control For PMSM
Motor
Product Feature
1. High capacity 256k TI DSP with faster response and higher
accuracy.
2. Support Synchronous and Asynchronous motors
3. Output frequency up to 3000hz
4. Special brake logic mechanism for crane and hoist application
5. Support 2 PID functions for HVAC
6. Magnetic flux brake gain
7. Up to 200% starting torque at 0hz
8. Torque control for winding and rewinding
Technical Specification
| |
Control | Control mode | V/f control Sensorless flux vector control without PG card(SVC) Sensor speed flux vector control with PG card (VC) |
Operating mode | Speed control,Torque control(SVC and VC) |
Speed range | 1:100 (V/f) 1:200( SVC) 1:1000 (VC) |
Speed control accuracy | ±0.5% (V/f) ±0.2% (SVC) ±0.02% (VC) |
Speed response | 5Hz(V/f) 20Hz(SVC) 50Hz(VC) |
frequency range | 0.00～2000.00Hz(V/f) 0.00～200.00Hz(SVC) 0.00～400.00Hz(VC) |
Input frequency resolution | Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.1% |
Startup torque | 150%/0.5Hz(V/f) 180%/0.25Hz(SVC) 200%/0Hz(VC) |
Torque control accuracy | SVC:within 5Hz10%,above 5Hz5% VC:3.0% |
V/f curve | V / f curve type: straight line, multipoint, power function, V / f
separation; Torque boost support: Automatic torque boost (factory setting),
manual torque boost |
Frequency giving ramp | Support linear and S curve acceleration and deceleration; 4 groups of acceleration and deceleration time, setting range 0.00s
~ 60000s |
DC bus voltage control | Overvoltage stall control: limit the power generation of the motor
by adjusting the output frequency to avoid skipping the voltage
fault;
Undervoltage stall control: control the power consumption of the
motor by adjusting the output frequency to avoid yaw failure
VdcMax Control: Limit the amount of power generated by the motor by
adjusting the output frequency to avoid over-voltage trip; VdcMin control: Control the power consumption of the motor by
adjusting the output frequency, to avoid jump undervoltage fault |
Carrier frequency | 1kHz～12kHz(Varies depending on the type) |
Startup method | Direct start (can be superimposed DC brake); speed tracking start |
Stop method | Deceleration stop (can be superimposed DC braking); free to stop |
Maincontrol function | Jog control, droop control, up to 16-speed operation, dangerous
speed avoidance, swing frequency operation, acceleration and
deceleration time switching, VF separation, over excitation
braking, process PID control, sleep and wake-up function, built-in
simple PLC logic, virtual Input and output terminals, built-in
delay unit, built-in comparison unit and logic unit, parameter
backup and recovery, perfect fault record,fault reset, two groups
of motor parametersfreeswitching, software swap output wiring,
terminals UP / DOWN |
| | |
Model Range
Model | Power capacity (KVA) | Input current (A) | Output current(A) | Adaptable Motor (KW) | SIZE | Brake Unit |
Heavy load | Light load |
Three phase: 380-480V,50/60Hz |
VFD530-R75GT4B | 1.5 | 3.4 | 2.5 | 4.2 | 0.75 | SIZE A | Internal |
VFD530-1R5GT4B | 3 | 5 | 4.2 | 5.6 | 1.5 |
VFD530-2R2GT4B | 4 | 5.8 | 5.6 | 9.4 | 2.2 |
VFD530-4R0G/5R5PT4B | 5.9 | 10.5 | 9.4 | 13.0 | 3.7 |
VFD530-5R5G/7R5PT4B | 8.9 | 14.6 | 13.0 | 17.0 | 5.5 | SIZE B |
VFD530-7R5G/011PT4B | 11 | 20.5 | 17.0 | 23.0 | 7.5 |
VFD530-011G/015PT4B | 17 | 26.0 | 25.0 | 31.0 | 11 | SIZE C | Internal |
VFD530-015G/018PT4B | 21 | 35.0 | 32.0 | 37.0 | 15 |
VFD530-018G/022PT4B | 24 | 38.5 | 37.0 | 45.0 | 18.5 | SIZE D |
VFD530-022G/030PT4B | 30 | 46.5 | 45.0 | 57.0 | 22 |
VFD530-030G/037PT4 | 40 | 62.0 | 60.0 | 75.0 | 30 | SIZE E | option |
VFD530-037G/045PT4 | 50 | 76.0 | 75.0 | 87.0 | 37 |
VFD530-045G/055PT4 | 60 | 92.0 | 90.0 | 110.0 | 45 | SIZE F |
VFD530-055G/075PT4 | 75 | 113.0 | 110.0 | 135.0 | 55 |
VFD530-075G/090PT4 | 104 | 157.0 | 152.0 | 165.0 | 75 | SIZE G |
VFD530-090G/110PT4 | 112 | 170.0 | 176.0 | 210.0 | 90 | External |
VFD530-110G/132PT4 | 145 | 220.0 | 210.0 | 253.0 | 110 | SIZE H |
VFD530-132G/160PT4 | 170 | 258.0 | 253.0 | 304.0 | 132 | SIZE I |
VFD530-160G/185PT4 | 210 | 320.0 | 304.0 | 360.0 | 160 |
VFD530-185G/200PT4 | 245 | 372.0 | 360.0 | 380.0 | 185 | SIZE J |
VFD530-200G/220PT4 | 250 | 380.0 | 380.0 | 426.0 | 200 |
VFD530-220G/250PT4 | 280 | 425.0 | 426.0 | 465.0 | 220 | SIZE K |
VFD530-250G/280PT4 | 315 | 479.0 | 465.0 | 520.0 | 250 |
VFD530-280G/315PT4 | 350 | 532.0 | 520.0 | 585.0 | 280 | SIZE L |
VFD530-315G/355PT4 | 385 | 585.0 | 585.0 | 650.0 | 315 |
VFD530-355G/400PT4 | 420 | 638.0 | 650.0 | 725.0 | 355 | SIZE M |
VFD530-400G/450PT4 | 470 | 714.0 | 725.0 | 820.0 | 400 |
VFD530-450G/500PT4 | 530 | 800.0 | 820.0 | / | 450 | SIZE N |
VFD530-500G/560PT4 | 580 | 880.0 | 900.0 | / | 500 |
VFD530-560G/630PT4 | 630 | 950.0 | 980.0 | / | 560 | SIZE O |
VFD530-630GT4 | 710 | 1080 | 1120. | / | 630 | SIZE O |
VFD530-710GT4 | 790 | 1200 | 1260 | / | 710 | SIZE O |
Single phase :220V ,50/60HZ |
VFD530-R40GS2 | 1.3 | 6.0 | 3.2 | 5.6 | 0.4 | SIZE A | Inbuilt |
VFD530-R75GS2 | 2.4 | 11.0 | 5.6 | 8.0 | 0.75 | SIZE A |
VFD530-1R5GS2 | 3.5 | 15.0 | 8.0 | 10.6 | 1.5 | SIZE A |
VFD530-2R2GS2 | 5.5 | 25.0 | 10.6 | 14.0 | 2.2 | SIZE A |
VFD530-4R0GS2 | 7.7 | 35.0 | 17.0 | 23.0 | 4.0 | SIZE B |
VFD530-5R5GS2 | 8.9 | 53.0 | 25.0 | 31.0 | 5.5 | SIZE C |
VFD530-7R5GS2 | 11 | 67.0 | 32.0 | 37.0 | 7.5 | SIZE C |
Product Application
FAQ
1. What's the shipping method?
We support ship by express, by air and by sea. And we will
recommend the most suitable shipping way to you according to your
order list.
2. How are your products packaged?
0.75kw-37kw use carton, 45kw and above use wooden box.
3. Do you accept OEM order?
Yes we accept OEM order with your authorization.
